脉冲末修弹落点预测导引方法研究

在分析剩余射程影响因素的基础上,以弹道特征参数弹道高y及速度矢量分量Vx和Vy为解释变量,以回归分析方法为数学工具,建立脉冲末修弹剩余射程预测模型。以目标点与弹丸预测落点之间的差值为广义弹道偏差,结合数值仿真,对落点预测导引进行深入研究,验证了回归分析模型的可行性。     

元器件性能退化信息的系统性能可靠性评估

性能可靠性方法为解决现代工程实际中的高可靠、长寿命、小子样产品的可靠性建模分析提供了途径.目前的性能可靠性研究主要是针对元器件开展的,对系统性能可靠性进行研究时通常需要将其看作一个元器件,需要得到系统的性能退化数据,在某些情况下,得到系统的性能退化数据比较困难.实际上,由于元器件的性能退化导致系统性能的变化,因而可以利...     

SpaceFibre网络服务质量时隙资源分配算法

为保证SpaceFibre星载数据网络大量实时数据流的超高速确定性传输,提出一种包含两个子算法的SpaceFibre网络服务质量时隙资源分配算法。形式化描述网络服务质量机制,给出调度矩阵相关定义;创建网络服务质量排队模型,定量分析时隙资源分配对网络时延性能的影响;考虑网络兼容性和算法鲁棒性,给出改进二进制序列调度子算法;采用提高初始种群进化程度和增加遗传算子等方法,给出改进混合单亲遗传调度子算法;利用Opnet网络仿真平台建立网络服务质量仿真模型,对比不同算法下网络时延性能。仿真结果表明,该时隙资源分配算法与其他算法相比,网络平均延时降低,网络性能得到显著改善,对构建低延时SpaceFibre网络具有参考意义。     

动初级高速六相直线感应电机工作特性分析

为了准确刻画对象模型,采用一阶等效电路瞬态涡流分析法对动态边端效应影响下动初级高速六相直线感应电机的参数时变规律进行了定量计算,并通过感应涡流损耗推导得到考虑动态边端效应时电机的等效电路。基于此,通过电磁推力计算及效率评估对动态边端效应影响下电机的工作特性进行了详细分析。利用不同运行速度条件下的有限元仿真及动态实验验证了理论分析和推导的正确性。     

考虑腐蚀因素的船体结构寿命预测方法

为建立考虑腐蚀因素的船体结构寿命预测方法,在分析现有常用的船体结构腐蚀损伤时变模型的基础上,根据舰船维修保障实际情况建立了考虑腐蚀防护系统作用时间和维修时间等因素的腐蚀时变模型。根据相关规范选择了船体结构腐蚀寿命标准,并建立了一种计算船体结构腐蚀寿命的方法。该方法建立了船体结构腐蚀寿命与腐蚀防护系统作用时间和修理时间等因素之间的量化关系,可以用于预测均匀腐蚀条件下船体结构寿命,也可以反过来指导腐蚀防护系统设计指标的选择和船体结构维修策略的确定。     

重力势能锁止型外骨骼设计及其效能评价

现存的被动式外骨骼存在助力效果不明显等缺陷。基于人体步态特征,提出了将人体行走过程中的重力势能转化为人体抬腿过程中动能的原理,通过弹簧、曲柄滑块机构、棘轮棘爪机构以及链传动机构的组合,设计了一款被动式下肢机械外骨骼,并通过外骨骼动力学分析和生理消耗指数实验测试的方法进行了外骨骼性能评价。动力学分析结果表明,穿戴外骨骼后髋关节峰力矩总量降低了23.43%,髋关节做功总量降低了30.59%,初步验证了外骨骼的有效性。生理消耗指数实验测试结果表明, 穿戴外骨骼对于短距离动作转换未产生显著效果,但在长距离行走和上坡行走中分别降低了8.1%和10.4%的能量消耗。因此,该下肢外骨骼助力性能得到了验证,为相关领域的研究提供了实例化参考。     

Storage life prediction under pre-strained thermally-accelerated aging of HTPB coating using the change of crosslinking density

In order to predict the storage life of a certain type of HTPB (hydroyl-terminated polybutadiene) coating at 25 C and analyze the influence of pre-strain on the storage life, the accelerated aging tests of HTPB coating at 40 C, 50 C, 60 C, 70 C with the pre-strain of 0%, 3%, 6%, 9%, respectively were carried out. The variation regularity of the change of crosslinking density was analyzed and the aging model of HTPB coating under pre-strained thermally-accelerated aging was proposed. The storage life of HTPB coating at 25 C was estimated by using the Berthelot equation as the end point of the aging life with a 30% decrease in maximum elongation. The results showed that the change of crosslinking density of HTPB coating increased with the increase of aging temperature and aging time, and decreased with the in-crease of pre-strain. Under 0% pre-strain, the relationship between the change of crosslinking density of HTPB coating and the aging time can be described by the logarithmic model with the confidence probability greater than 99%.The stress relaxation phenomenon existed under 3%, 6% and 9% pre-strained aging. The aging model considering chemical aging and pre-strain was established with the confidence probability greater than 90%. The storage life of HTPB coating was 15.2935 years at 25 C under 0% pre-strain, which was reduced by 13.9007%, 75.6949% and 89.7859% under 3%, 6% and 9% pre-strain, respectively. The existence of pre-strain has a serious impact on the storage life of HTPB coating, therefore, the pre-strain should be avoided as much as possible during the actual storage.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

未来30年太空安全发展趋势及影响

“太空安全战略”专题编者按 组稿专家：杨乐平（国防科技大学空天科学学院教授、博士生导师） 近年来,以美国重建太空司令部与天军独立为标志,国际太空领域战略竞争与军事对抗日益加剧,太空前所未有地应用于军事与安全,太空安全也受到了前所未有的挑战。为了解未来太空安全发展和主要国家太空安全战略动向,深化太空安全战略研究,《国防科技》编辑部于2021年6月启动“太空安全战略”专题征文活动,国内相关学者积极投稿,经专家遴选,本期发表入选稿件6篇。来稿内容涵盖未来30年太空安全发展预测、美国太空安全最新发展、俄罗斯太空安全政策、欧盟太空安全政策、日本太空安全战略以及印度太空力量发展等主题,较为全面地反映了当前国际太空安全领域的最新发展与战略动向。从长远看,随着地球以外人类活动的增加、太空新经济蓬勃发展和太空创造财富规模不断扩大,水平大幅提升,太空将超越陆、海、空成为国家安全最重要的领域。从这个意义上讲,太空安全战略研究学术价值与影响较大,值得高度关注。     

二维拉格朗日和欧拉结合法在流处理器MASA上的实现与评测

现代半导体工艺技术的发展使得在单芯片上放置数百个运算单元成为可能,但是全局片上片外带宽受限。通用处理器体系结构不能较好地适应变化,仍然依靠全局片上结构,少量的运算单元。而流体系结构拥有大量的运算单元、鲜明的存储层次,使得在有限的片外带宽下,用高的本地带宽来满足大量运算单元的需求。首先介绍了原型MASA流体系结构,然后给出了爆轰流体力学中的二维拉格朗日和欧拉结合法(Ygx2)在流体系结构上实现的实例研究,最后用时钟精确的模拟器来评测应用的运行性能,结果表明Ygx2应用在500MHz的MASA上运行结果与1.6GHz的Iantium2的比较快近4倍,证实了流体系结构在高性能计算领域的极大潜力。